Search results for "Surface acoustic wave"
showing 10 items of 32 documents
Acoustic spectral hole-burning in a two-level system ensemble
2020
AbstractMicroscopic two-level system (TLS) defects at dielectric surfaces and interfaces are among the dominant sources of loss in superconducting quantum circuits, and their properties have been extensively probed using superconducting resonators and qubits. We report on spectroscopy of TLSs coupling to the strain field in a surface acoustic wave (SAW) resonator. The narrow free spectral range of the resonator allows for two-tone spectroscopy where a strong pump is applied at one resonance, while a weak signal is used to probe a different mode. We map the spectral hole burnt by the pump tone as a function of frequency and extract parameters of the TLS ensemble. Our results suggest that det…
Carrier Transport in GaAs Nanowires Using Surface Acoustic Waves
2012
ABSTRACTThe oscillating piezoelectric field of a surface acoustic wave (SAW) is employed to transport photoexcited electrons and holes in GaAs nanowires (NWs) transferred to a SAW beam line on a LiNbO3 crystal. We show that carriers generated in the NW by a focused light spot can be acoustically transported to a second location, where they recombine emitting short light pulses. The results presented here demonstrate the high-frequency manipulation of carriers in NWs without the use of electrical contacts, which opens new perspectives for applications in opto-electronic devices operating at GHz frequencies.
Laser-Generated Acoustic Signal Interaction with Surface Flaws on Rail Wheels
2005
Long- and short-range acoustic-signal interaction with surface-breaking cracks and geometric boundaries of the rail-wheel tread area are presented in this article. Ultrasonic signals are generated using a laser-line source of varying length and distance from a crack and are detected with a 1-MHz contact transducer to map the sound field behind the crack in the near, intermediate, and far fields of the insonified region. The factors that affect the behavior of a laser-generated surface acoustic wave propagating along the tread area of a rail wheel are discussed. A signal normalization method is proposed to help in sensing the presence of a crack from the transmitted signal unaffected by the …
Acoustically tunable photonic band gap structures
2005
We discuss the formation of a tunable one-dimensional photonic band gap structure through the modulation of the resonance frequency of an optical microcavity by a surface acoustic wave (SAW). The microcavity consists of a λ/2 GaAs layer bounded by AlAs/GaAs Bragg mirrors. The SAW periodically modulates the optical thickness of the cavity layer, leading to a light dispersion relation folded within a mini-Brillouin zone (MBZ) defined by |k x |≤ π/λ SAW (k x denotes the photon wave vector component along the SAW propagation direction x-with-caret). In reflection and diffraction experiments, we observe photon modes bounding the gaps in the center and at the boundary of the MBZ as well as a reno…
Thermally Tunable Surface Acoustic Wave Cavities
2020
We experimentally demonstrate the dynamical tuning of the acoustic field in a surface acoustic wave (SAW) cavity defined by a periodic arrangement of metal stripes on LiNbO3 substrate. Applying a dc voltage to the ends of the metal grid results in a temperature rise due to resistive heating that changes the frequency response of the device up to 0.3%, which can be used to control the acoustic transmission through the structure. The timescale of the switching is demonstrated to be of about 200 ms. In addition, we have also performed finite-element simulations of the transmission spectrum of a model system, which exhibits a temperature dependence consistent with the experimental data. The adv…
Detection and monitoring of carbon monoxide using cobalt corroles film on Love wave devices with delay line configuration
2011
Among specific sensitive materials synthesized for chemical sensor development, cobalt corrole have shown attractive capabilities for CO detection [1, 2]. In this paper, we investigate the possibility to exploit such materials to develop surface acoustic wave (SAW)-based sensors. We actually demonstrate that SAW devices using delay line configuration allow investigating the molecular recognition occurring in non-conductive sensing layers of cobalt corroles. We have monitored phase variations of SAW devices versus various CO concentrations. Moreover, a specific testing setup has been developed to precisely dose CO at low concentrations, to avoid any CO leakage in the environment, to systemat…
Direct imaging of delayed magneto-dynamic modes induced by surface acoustic waves.
2017
The magnetoelastic effect—the change of magnetic properties caused by the elastic deformation of a magnetic material—has been proposed as an alternative approach to magnetic fields for the low-power control of magnetization states of nanoelements since it avoids charge currents, which entail ohmic losses. Here, we have studied the effect of dynamic strain accompanying a surface acoustic wave on magnetic nanostructures in thermal equilibrium. We have developed an experimental technique based on stroboscopic X-ray microscopy that provides a pathway to the quantitative study of strain waves and magnetization at the nanoscale. We have simultaneously imaged the evolution of both strain and magne…
Polarized recombination of acoustically transported carriers in GaAs nanowires
2012
: The oscillating piezoelectric field of a surface acoustic wave (SAW) is employed to transport photoexcited electrons and holes in GaAs nanowires deposited on a SAW delay line on a LiNbO3 crystal. The carriers generated in the nanowire by a focused light spot are acoustically transferred to a second location where they recombine. We show that the recombination of the transported carriers occurs in a zinc blende section on top of the predominant wurtzite nanowire. This allows contactless control of the linear polarized emission by SAWs which is governed by the crystal structure. Additional polarization-resolved photoluminescence measurements were performed to investigate spin conservation d…
Surface Acoustic Wave Sensors for the Detection of Hazardous Compounds in Indoor Air
2017
Presented at the Eurosensors 2017 Conference, Paris, France, 3–6 September 2017.; International audience; In this work, the authors show the capabilities of Surface Acoustic Wave (SAW) devices coupled with various absorbents to probe the properties of gas sensitive materials for the manufacturing of hazardous gas sensors. The great capabilities of cobalt corroles for the trapping of carbon monoxide (CO) were exploited to produce selective sensors. These corroles were deposited on SAW delay lines surfaces and then exposed to carbon monoxide (CO) in standard conditions. Concentrations of a few hundreds of ppb were measured emphasizing the interest of such sensors for the detection of CO. Anot…
Focusing of surface-acoustic-wave fields on (100) GaAs surfaces
2003
Focused surface-acoustic waves (SAWs) provide a way to reach intense acoustic fields for electro- and optoacoustic applications on semiconductors. We have investigated the focusing of SAWs by interdigital transducers (IDTs) deposited on (100)-oriented GaAs substrates. The focusing IDTs have curved fingers designed to account for the acoustic anisotropy of the substrate. Different factors that affect focusing, such as the aperture angle and the configuration of the IDT fingers, were systematically addressed. We show that the focusing performance can be considerably improved by appropriate choice of the IDT metal pads, which, under appropriate conditions, create an acoustic waveguide within t…